Installing Optional Accessories
You can make the printer more functional by installing the optional accessories such as the 512MB Memory, the 550
sheet feeder, Cabinet, Wireless Network Kit b/g/n, and the hard disk unit. This section describes how to install these
printer's options.
This section includes:
• "Installing the Optional 512MB Memory" on page 49
• "Installing the Optional 550 Sheet Feeder and the Cabinet" on page 54
• "Installing the Optional 550 Sheet Feeder (without the Cabinet)" on page 63
• "Installing the Optional Wireless Printer Adapter" on page 67
• "Installing the Optional Hard Disk Unit" on page 72
Installing the Optional 512MB Memory
NOTE:
•
Your printer supports additional 512 MB memory module.
1
Turn off the printer.
IMPORTANT:
•
If the optional hard disk unit is not installed on your printer, note that the data in the memory are cleared when the printer
is turned off.
2
Turn the screw on the control board cover counterclockwise.
NOTE:
•
Loosen the screw. You do not need to remove the screw.
49
Basic Operation