Ram Bracket Mounting; Ram Bracket Mounting Points - Honeywell MX9 User Manual

RAM Bracket Mounting

RAM Bracket Assembly mounting holes are on the back of the cradle. The mounting screws fit in Pim nuts and are automat-
ically secured.
The number of RAM balls attached to the back of the vehicle mount cradle are dependent upon the desired RAM mount
configuration.
The figure shown below is an example
RAM ball mounting screws are included in the mounting kit. Contact
Mount Kit for the vehicle cradle.

RAM Bracket Mounting Points

only
.
Technical Assistance (page 15-1) for the MX9 RAM
1. RAM ball mounted on the back of the vehi-
cle cradle
2. Connecting the vehicle cradle to the
assembled RAM Mount Kit
3. Adjusting knob
4. RAM arm
5. RAM ball base mounted to the vehicle
13 - 13