Mounting Bracket Clips; Connect - Honeywell HX2 Reference Manual

Mounting Bracket Clips

Mounting brackets are pre-installed to the back of the HX2. The brackets (one on each side) secure the HX2 to the mounting
bracket clips on a hip flip or the armband.

Connect

Center the HX2 over the mount assembly and gently push down until both mount bracket clips snap over the brackets on the
HX2. Carefully test the connection to make sure the HX2 is secured to the armband or hip flip.
Reset the connection by pressing down on either mounting clip to release the HX2 and try again.
1-10