Ram Bracket Mounting; Ram Bracket Mounting Points - Honeywell MX7 Reference Manual

RAM Bracket Mounting

RAM Bracket Assembly mounting holes are on the back of the cradle. The mounting screws fit in Pim nuts and are
automatically secured.
The number of RAM balls attached to the back of the vehicle mount cradle are dependent upon the desired RAM mount
configuration.
The figure shown below is an example only.
RAM ball mounting screws are included in the mounting kit. Contact
vehicle cradle.

RAM Bracket Mounting Points

4-8
1 Trigger Handle opening
2 Upper mounting points
3 Lower mounting points
Technical Assistance for the MX7 RAM Mount Kit for the