Preferences - Honeywell MX9 User Manual

Preferences

For best results, use AppLock
Administration
By default, Keep settings unlocked for 10 minutes is disabled (checkbox is blank).
Application
Startup
Behavior of the Enabler when the MX9 boots up. The default is Monitor for Updates.
• Do not Monitor - When the device boots, do not launch the Enabler application and do not attempt to connect to
the Mobile Device Server.
• Monitor for Updates - Attempt to connect to the Mobile Device Server and process any updates that are
available. Do not launch the Enabler application.
• Launch User Interface - Attempt to connect to the Mobile Device Server and process any updates that are
available. Launch the Enabler application.
Shutdown
Behavior of the monitor when the Enabler is exited. The default is Monitor for Updates.
• Monitor for Updates - Attempt to connect to the Mobile Device Server and process any updates that are
available. Do not launch the Enabler application.
• Exit Application - Terminates the monitor (requires successful password entry if a password has been
configured).
Activity Log
Log Level
Use this option to control the level of detail recorded in the log file. The default is No Activity Log.
• No Activity Log - No log file is written.
• Critical - Only critical errors written to the log files.
• Error - Communication or configuration problems are written to the log file along with critical messages.
• Warning - Possible operation problems are written to the log file along with critical and error messages.
• Info - Operational information is written to the log file.
• Debug - The most detailed log file.
Display Level
(page 6-1) to manage the taskbar. AppLock is resident on each mobile device.
9 - 11