Honeywell MX9 User Manual page 100

Command
Command
options
load
start
stop
unload
Options
Options
pkt_size in bytes
cap_size in bytes
.cap file
Run cmd
Performs the command selected.
5 - 44
Function
Specifies the option to perform. See the table below for the option parameters and values.
Loads and starts Netlog.
Starts the Netlog process of logging the network traffic.
Stops Netlog from logging network traffic.
Unloads Netlog.
Function
Specifies the maximum packet size captured in bytes. This option should only be run after
you have called load and stop. Default is 5000.
Specifies the maximum size of Netlog0.cap or Netlog1.cap in bytes. This option should
only be run after you have called load and stop. Default is 500,000.
Specifies the name of the file to which network traffic information is saved. This option
should only be run after you have called load and stop. Default is \netlog.