Power Key Functions; Status Leds; System Status Led; Battery Charging Status Led - Honeywell MX9 User Manual

Power Key Functions

The Power key is located at the bottom left of the keypad. The Power On/Off key is a momentary contact. Function is as follows:
When the is in ...
MX9
Off mode
On mode
Suspend mode
Critical Suspend mode
Backlight off mode

Status LEDs

Several LEDs are located on the front of the MX9 above the integrated speaker. They are:
• System Status (SYS) LED indicates power management status.
• Battery Charging Status (BATT) LED indicates main battery charging status.
• Alpha Mode Status (ALPHA) LED applies to the 38-key keypad only.
• Bluetooth Status LED applies to Bluetooth client functions.

System Status LED

Blinking Red
Solid Red
Yellow / Amber

Battery Charging Status LED

Off No battery, no AC power, battery pack not plugged in or no AC power applied
Flashing Red Fault, battery pack fault or failure
Yellow / Amber Standby, battery pack temperature out of range
Red Charging, battery pack charging (icon on touch screen)
Green Charged, battery pack fully charged. Connected to external power.

Alpha mode Status LED

Green when in alpha mode, 38-key keypad only.

Bluetooth Status LED

Blinking slowly
Blinking medium
Blinking fast
Unlit
3 - 4
Battery power fail; critical suspend
Main battery low
Initial few seconds when Power key is pressed
Bluetooth is active but not connected to a device.
Bluetooth is paired and connected to a device.
Bluetooth is discovering other Bluetooth devices.
Bluetooth hardware has been turned off or does not exist in the MX9.
Pressing the Power key ...
boots the unit and sets it to the On mode
sets the unit in Suspend mode
sets the unit in On mode
has no effect
sets the unit in Suspend mode