Wireless Zero Config Utility And The Summit Radio; Using The Wireless Zero Config Utility; Switching Control To Scu; Main Tab - Honeywell MX9 User Manual

Wireless Zero Config Utility and the Summit Radio

The WZC utility has an icon in the toolbar that looks like networked computers with a red X through them, indicating that
Wireless Zero Config application is enabled but the connection is inactive at this time (the device is not connected to a net-
work). The WZC icon may not be visible until control is passed to the WZC utility as described below.
You can use either the Wireless Zero Configuration Utility or the Summit Client Utility to connect to your network. Use the
Summit Client Utility to connect to your network. The Wireless Zero Configuration Utility cannot control the complete set of
security features of the radio.

Using the Wireless Zero Config Utility

1. Select ThirdPartyConfig in the Active Profile drop down list as the active profile. See
2. Open the Registry
The Summit Client Utility passes control to Wireless Zero Config and the WZC Wireless Information control panel.
Using the options in the Wireless Zero Config panels, setup radio and security settings. There may be a slight delay
before the Wireless Zero Config icon indicates the status of the connection.

Switching Control to SCU

1. To switch back to SCU control, select any other profile in the SCU Active Config drop down list, except ThirdParty-
Config.
2. Open the Registry

Main Tab

Setting
Admin Login
Radio
Active Config/Profile
Regulatory Domain
The Main tab displays information about the wireless client device including:
• SCU (Summit Client Utility) version.
• Driver version.
• Radio Type (BG is an 802.11 b/g radio, ABG is an 802.11 a/b/g radio).
(page 5-56) panel and tap Warmboot.
(page 5-56) panel and tap Warmboot. Radio control is passed to the SCU.
Default
SUMMIT
Enabled
Default
Varies by location
Main Tab (page 10-3).
10 - 3