Status Popup Tab - Honeywell MX9 User Manual

Status Popup Tab

Options on this tab configure the Status Popup window. When the Status popup window is displayed, it is placed on top
of the window in focus and hides any data beneath it. It is closed by pressing the assigned Status User or Status
Admin key sequence.
Using the Key mapping control panel, the System Administrator must first assign a Status User key sequence for the
end-user when they want to toggle the Status Popup Window on or off.
The System Administrator must also assign a Status Admin key sequence to perform the same function. Status popup
window display options (taskbar icons) are assigned on the Status Popup tab. E.g., AC Power, ActiveSync, WLAN
radio, CapsLock, Network status, Bluetooth status, etc.
The default for the User and Admin status popup windows is to show all status information. The 5 second timeout to
remove the status popup from the display is disabled by default for the User and Admin status popup windows.
5 - 41