Mx9 Pushes File To Remote Device; Ezpair (Or Lxez Pairing) And External Applications; Opp Setup Tab - Honeywell MX9 User Manual

MX9 Pushes File to Remote Device

This section assumes that a device supporting OPP is paired with the MX9.
The MX9 (OPP client) initiates a connection to the remote device (OPP server) by selecting a file to push to the remote
device. The MX9 sends the file and disconnects. The remote device may prompt the user (of that remote device) to accept
the incoming request depending on the security settings of the remote device. The prompt may be displayed more than
once, or it may not be displayed at all.
Notifications enabled
The file is pushed to the remote device and the user of the MX9 is notified of the completion of the push.
Notifications disabled
The file is pushed to the remote device and the user of the MX9 is not notified of the completion of the push.

EZPair (or LXEZ Pairing) and External Applications

Because only one application can use the OPP service at a time, external applications that wish to use OPP should disable
EZPair OPP before using the OPP service and restore EZPair OPP upon completion using available API calls (see the CE
API Programming Guide for details). These API calls are the equivalent of checking or unchecking the Disable EZPair OPP
checkbox.
• If Disable EZPair OPP is not checked, checking it causes EZPair OPP to be disabled and the send and receive
functionality is disabled.
• If Disable EZPair OPP is checked, and no application has registered a callback, un-checking EZPair OPP enables OPP
functionality in EZPair, and the send and receive functionality is enabled.
• If Disable EZPair OPP is checked, and another application has registered a callback, un-checking Disable EZPair OPP
issues a dialog box which says "Another application is using OPP. Do you wish to force their disconnection? Doing so
will force the other application to be unregistered." The application that has been forcibly unregistered receives a
FORCED_UNREGISTER_RECEIVED event.

OPP Setup Tab

Use this screen to setup the MX9 for Object Push Protocol (OPP).
Inbox
This is an alphanumeric field displaying the currently selected Inbox.
• The Inbox is the location where files pushed to the MX9 from a remote client are stored. Use the browse button ... to browse
to and select the Inbox folder.
• Use Windows Explorer to create a custom directory, if desired, before selecting the Inbox folder.
The default Inbox is \My Device\My Documents\DefaultInbox.
7 - 16