User Interface; Enabler Configuration - Honeywell MX9 User Manual

User Interface

The Enabler can be configured and controlled manually through the user interface on the MX9. This section details the
functionality that can be controlled by the user or system administrator.
Screen displays shown in this section are designed to present the end-user with information graphically.
Placement of information on the screen displays may be split between one or many tabbed panels.
Standard Avalanche Enabler parameters that are not supported by Honeywell may be missing or dimmed (visible but unable to
be edited) on the tabbed panels or screen displays.

Enabler Configuration

Depending on the version of the Enabler running on the MX9, the Enabler icon may look like one of the following:
or
The Enabler user interface application is launched by clicking either the Enabler Settings icon on the desktop or Taskbar or
by selecting Avalanche Enabler from the Programs menu.
The opening screen presents the MX9 user with the connection status and a navigation menu.
Note: Some parameters and features described in this section may not be available until you are running the latest version
of the Enabler.
9 - 4
Enabler Settings Icon