Mx9 Options; Communication Tab - Honeywell MX9 User Manual

MX9 Options

Start > Settings > Control Panel > MX9 Options
Set options unique to your device, such as keypad backlight, Status Popup taskbar icon display and CapsLock. It may be
necessary to warmboot the MX9 after making desired changes. A pop up window imforms if a warmboot is required.

Communication Tab

Options on this tab configure communication options for the MX9.
Enable TCP/IP Version 6
By default, IPv6 is disabled on the MX9. Tap this check box to enable IPv6.
Allow Remote Desktop Autologon
By default, Remote Desktop Autologon is disabled. Tap this check box to enable Remote Desktop Autologon.
Note: The .RDP file must be saved in the \System folder. When prompted, use the Save As button to save the .RDP file
is the \System directory. If the .RDP file is saved in the default root folder location, the .RDP file will not persist
across a warmboot.
Autolaunch TimeSync
By default, TimeSync does not automatically run on the MX9. To enable TimeSync to run automatically on the MX9,
tap this check box.
Synchronize with a Local Time Server
By default, GrabTime synchronizes via an Internet connection. To synchronize with a local time server:
1. Use ActiveSync to copy GrabTime.ini from the My Device > Windows folder on the mobile device to the host PC.
2. Edit the copy of GrabTime.ini on the host PC. Add the local time server's domain name to the beginning of the list of
servers. You can optionally delete the remainder of the list.
3. Copy the modified GrabTime.ini file to the My Device > System folder on the mobile device.
The System/GrabTime.ini file takes precedence over the Windows/GrabTime.ini file. System/Grabtime.ini also persists
after a coldboot; Windows/Grabtime.ini does not persist.
5 - 39