Chapter 7 - Bluetooth Configuration; Introduction - Honeywell MX9 User Manual

7
Bluetooth Configuration

Introduction

Start > Settings > Control Panel > Bluetooth
Discover and manage pairing with nearby Bluetooth devices.
Contact Technical Assistance
presented in this section.
Setting
Discovered Devices
Settings
Bluetooth button (Toggle client On/Off)
Computer is connectable
Computer is discoverable
Prompt if devices request to pair
Continuous search
Filtered Mode
Printer Port on COM9:
Logging
Computer Friendly Name
Reconnect
Report lost connection
Report when reconnected
Report failure to reconnect
Clear Pairing Table on boot
Auto Reconnect on Boot
Auto Reconnect
OPP Setup
Inbox
Outbox
Write Capable
Enable Notifications
Disable EZPair OPP
(page 15-1) for upgrade availability if your Bluetooth panels are not the same as the panels
Default
None
Bluetooth client is On.
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled (unchecked) by default in both Filtered and
Non Filtered Modes. The option is dimmed in Non
Filtered Mode.
Disabled
System Device Name
Enabled
Disabled
Enabled
Disabled
Enabled
Enabled
\My Device\My Documents\DefaultInbox
\My Device\My Documents\DefaultOutbox
Enabled
Enabled
Unchecked, OPP is enabled
7 - 1