Honeywell MX9 User Manual page 150

Message
Exit ToAdmin
Exit ToUser
Exit ToUser-Registry read failure
Exit verify password-no pwd set
Exit verify password-response from dialog
Found taskbar
Getting address of keyboard hook init
procedure
Getting configuration from registry
Getting encrypt pwd length
Hook wndproc failure
Hook wndproc of open app failure
Hot key event creation failure
Hot key pressed
Hot key pressed
Hot key set event failure
Hotkey press message received
In app hook:WM_SIZE
In app
hook:WM_WINDOWPOSCHANGED
Initializing keyboard hook procedure
Keyboard hook initialization failure
Keyboard hook loaded OK
L after Ctrl
6 - 16
Explanation and/or corrective action
Exiting the function that handles the mode switch
into admin mode.
Exiting the user mode switch function.
The AppName value does not exist in the registry so
user mode cannot be entered.
Exiting password verification.
Exiting password verification.
The handle to the taskbar has been found so that
AppLock can disable it in user mode.
AppLock is retrieving the address of the keyboard
hook.
The AppLock configuration is being read from the
registry. This occurs at initialization and also at entry
into user mode. The registry must be re-read at
entry into user mode in case the administration
changed the settings of the application being
controlled.
The length of the encrypted password is being
calculated.
AppLock is unable to lock the application. This could
happen if the application being locked encountered
an error after performing its initialization and shut
itself down prior to being locked by AppLock.
The application is open, but AppLock cannot lock it.
The Admin applet is unable to create the hotkey
notification.
Processing the hotkey and backdoor entry
Processing the hotkey and backdoor entry
When the administrator changes the hotkey
configuration the hotkey controller must be notified.
This notification failed.
The user just pressed the configured hotkey.
In addition to preventing the locked application from
exiting, AppLock must also prevent the application
from enabling the taskbar and resizing the
application's window. This message traps a change
in the window size and corrects it.
In addition to preventing the locked application from
exiting, AppLock must also prevent the application
from enabling the taskbar and resizing the
application's window. This message traps a change
in the window position and corrects it.
AppLock is calling the keyboard hook initialization.
The keyboard filter initialization failed.
The keyboard hook dll exists and loaded
successfully.
Processing the backdoor entry.
Level
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_EX
LOG_ERROR
LOG_ERROR
LOG_ERROR
LOG_EX
LOG_EX
LOG_ERROR
LOG_PROCESSING
LOG_EX
LOG_EX
LOG_PROCESSING
LOG_ERROR
LOG_EX
LOG_EX