Preferences - Honeywell HX3 User Manual

Preferences

For best results, use AppLock for this function. AppLock is not available for the HX3.
If the Preferences tab is not present on the Enabler installed on your device, see the equivalent options on the
Shutdown (page 8-21) tab.
Administration
By default, Keep settings unlocked for 10 minutes is disabled (check box is blank).
Application
Startup
Behavior of the Enabler when the HX3 boots up. The default is Monitor for Updates.
• Do not Monitor - When the device boots, do not launch the Enabler application and do not attempt to connect to the
Mobile Device Server.
• Monitor for Updates - Attempt to connect to the Mobile Device Server and process any updates that are available.
Do not launch the Enabler application.
• Launch User Interface - Attempt to connect to the Mobile Device Server and process any updates that are available.
Launch the Enabler application.
Shutdown
Behavior of the monitor when the Enabler is exited. The default is Monitor for Updates.
• Monitor for Updates - Attempt to connect to the Mobile Device Server and process any updates that are available.
Do not launch the Enabler application.
• Exit Application - Terminates the monitor (requires successful password entry if a password has been configured).
Activity Log
Log Level
Use this option to control the level of detail recorded in the log file. The default is No Activity Log.
• No Activity Log - No log file is written.
• Critical - Only critical errors written to the log files.
• Error - Communication or configuration problems are written to the log file along with critical messages.
• Warning - Possible operation problems are written to the log file along with critical and error messages.
• Info - Operational information is written to the log file.
8 - 10
Startup/