Connecting To A Macintosh; Connecting The Camera And Your Macintosh - Ricoh WG-20 Operating Manual

Connecting to a Macintosh

Connecting the Camera and Your Macintosh

Connect your camera to the Macintosh using the provided USB cable
(I-USB7).
1
Turn your Macintosh on.
2
Turn your camera off.
3
Connect your camera to the Macintosh using the USB
cable.
Connect the terminal of the USB cable with arrow mark
the front side of the camera.
8
4
Turn your camera on.
The camera is recognized as [NO_NAME]
on the desktop.
We recommend using the optional AC adapter kit K-AC117 when
the camera is connected to the computer (p.38). If the battery runs out
of power while images are being transmitted to the computer, the image
data may be lost or damaged.
252
facing