Setting Pixel Track Sr; Press The 3 Button; The Camera Returns To Capture Mode; Rec. Mode - Ricoh WG-20 Operating Manual

D-Range settings are not applicable in b (Auto Picture)/9 (Green)
modes.

Setting Pixel Track SR

You can set this function to correct for camera shake when taking still
shots. If Pixel Track SR is set to O (On), the camera automatically
corrects for camera shake in the images you shot. The default setting
is P (Off).
Shake reduction settings in C (Movie) and
3
mode are configured under Movie SR (p.144).
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Pixel Track SR].
3
Use the four-way controller
(45) to switch between
O (On) or P (Off).
O(On)
P (Off)
The setting is saved.
4

Press the 3 button.

The camera returns to capture mode.

• In 9 (Green), X (Digital Wide), F (Digital Panorama), C (Movie),
mode, the Pixel Track SR is fixed at P (Off).
• Pixel Track SR does not function when the flash discharges even
if [Pixel Track SR] is set to O (On).
The Pixel Track SR may not be effective when the shutter speed is slow.
We recommend you turn off the [Pixel Track SR] setting P (off) and use
a tripod for slow shutter speeds.
126
Automatically corrects
for camera shake.
No correction for
camera shake.
(Underwater Movie), N (Frame Composite) and S (Fireworks)
(Underwater Movie)

Rec. Mode

2/4
Sensitivity
AUTO
AUTO ISO Range ISO80-800
EV Compensation 0.0
Movie
D-Range Setting
Pixel Track SR
Exit
MENU