Setting The Image Tone - Ricoh WG-20 Operating Manual

Setting the Image Tone

For setting the tone of images.
You can select from [Bright], [Natural], or [Monochrome].
The default setting is [Bright].
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Image Tone].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller
(23) to select a finishing tone.
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture mode.
• When [Monochrome] is selected, [Tone Adjustment] appears on
the [A Rec. Mode] menu for setting the tone of monochrome images
instead of [Saturation].
• Select [Monochrome] in
setting to [Standard].
Rec. Mode
Image Tone
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Cancel
MENU
(Report) mode to fix the Tone Adjustment
3
1/4
Bright
Natural
Monochrome
AWB
OK
OK
115