Setting The Exposure (Ev Compensation) - Ricoh WG-20 Operating Manual

Setting the Exposure (EV Compensation)

For adjusting the overall brightness of the picture.
Use this function to take pictures that are intentionally overexposed
or underexposed.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select
[EV Compensation].
3
3
Use the four-way controller
(45) to select the EV value.
To brighten, select a positive (+)
value. To darken, select a negative
(-) value.
You can choose the EV setting
in the range of -2.0 EV to +2.0 EV
in 1/3 EV steps.
4
Press the 3 button.
The camera returns to capture mode.
• When a histogram is displayed in Still Picture Capture mode or
Playback mode, you can check whether the exposure is correct (p.30).
• EV Compensation cannot be used in b (Auto Picture) or 9 (Green)
mode.
Saving the EV Compensation setting 1p.149
124
Rec. Mode 2/4
Sensitivity
AUTO
AUTO ISO Range ISO80-800
EV Compensation
0.0
Movie
D-Range Setting
Pixel Track SR
Exit
MENU