Using The Ink Rubbing Filter - Ricoh WG-20 Operating Manual

Using the Ink Rubbing Filter

You can edit the image to look like an ink rubbing.
The Ink Rubbing Filter cannot be used on the following images.
• Movies or images taken at F (Digital Panorama) or
modes
• Images that have recorded pixels of h, h, l, or m
• Images taken with other cameras
An error message appears in step 4.
1
Enter Q mode and use the four-way controller (45)
to choose the image you want to edit.
2
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller
(2345) to select
(Ink Rubbing Filter).
4
Press the 4 button.
The preview image of the results of the filter effect appears.
5
Use the four-way controller
(45) to choose the effect.
You can adjust the effect in five levels.
F
G
H
6
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved
as a new image and the following confirmation does not appear.
Weak
Standard
Strong
(Report)
Ink Rubbing Filter
C r e a t e s a n i m a g e s i m i l a r
t o i n k r u b b i n g f r o m
o r i g i n a l p i c t u r e s
Cancel
MENU
Ink Rubbing Filter Ink Rubbing Filter Ink Rubbing Filter
Cancel Cancel Cancel
MENU MENU MENU
1 / 2
5
OK
OK
OK OK OK
OK OK OK
185