Ricoh WG-20 Operating Manual page 89

To Switch the Pet You Want to Shoot
If you have registered two or three pets, choose the pet you want
to detect.
1
Press the I button on
the capture status screen
in e (Pet) mode.
The pet selection screen appears.
2
Use the four-way controller (45) to select the pet you want
to detect.
3
Press the 4 button.
The selected pet is switched to the pet you want to detect and
the camera returns to capture status.
To Delete the Pet from the Entry
1
Press the I button on
the capture status screen
in e (Pet) mode.
The pet selection screen appears.
2
Use the four-way controller (45) to select the pet you want
to delete.
3
Press the Green button.
4
Use the four-way controller (2) to select [Delete].
5
Press the 4 button.
The selected pet is deleted.
• [Focusing Area] is set to W (Automatic Tracking AF) and the flash
mode is set to a (Flash Off). However, you can change these settings.
• [Focus Assist] is set to off. However, you can change this setting.
Selecting pet to shoot
Cancel
MENU
Selecting pet to shoot
Cancel
MENU
Delete
OK 3
OK
Delete
OK
OK
87