Setting Blink Detection - Ricoh WG-20 Operating Manual

Setting Blink Detection

This specifies whether Blink Detection works when you use the Face
Detection function. The default setting is O (On).
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Blink
Detection].
3
Use the four-way controller (45)
to switch between O (On)
or P (Off).
O(On)
P (Off)
The setting is saved.
4
Press the 3 button.
The camera returns to capture mode.
Blink Detection 1p.68
If the Blink Detection function detected closed eyes when shooting,
[Closed eyes have been detected] is displayed for 3 seconds during
Instant Review.
Blink Detection function
works.
Blink Detection function
does not work.
Rec. Mode
3/4
Interval Shoot
Blink Detection
Digital Zoom
Instant Review
Memory
Green Button
Exit
MENU
3
129