Ricoh WG-20 Operating Manual page 111

1
Press the four-way controller
(4) in A mode.
The [Flash Mode] screen appears.
The flash mode changes each time
the button is pressed. You can also
change the setting using the four-way
controller (23).
2
Press the 4 button.
The setting is saved and the camera returns to capture mode.
About the red-eye phenomenon
Taking pictures using the flash may cause the subject's eyes to appear red
in the resulting picture. This phenomenon occurs when the light from the flash
is reflected in the subject's eyes. It can be reduced by illuminating the area
around the subject or moving closer to the subject and zooming out to a wider
angle. Setting the flash mode to c (Auto + Red-eye) or d (Flash On + Red-eye)
is also an effective way of reducing red eyes.
If the subject's eyes appear red despite such precautions, they can be corrected
by the red-eye compensation function (p.191).
Saving the Flash Mode setting 1p.149
Four-way controller
4 button
Flash Mode Flash Mode Flash Mode
Auto Auto Auto
Cancel Cancel Cancel
MENU MENU MENU
3
OK OK OK
OK OK OK
109