Ricoh WG-20 Operating Manual page 105

3
Press the 4 button.
The camera enters the X mode.
Turn the camera 90° clockwise
and align your first picture.
When the camera detects a person's face,
the Face Detection function is activated and
the face detection frame appears (p.71).
4
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
5
Press the shutter release button fully.
The first captured image is temporarily
saved, and the shooting screen for
the second image is displayed.
6
Take the second image.
Overlap the image on the preview guide on the left of the screen
to compose the second image. Repeat steps 4 and 5 to take
the second image. This combines first and second images.
The stitched first and second image appears on the display temporarily
(Instant Review), and then is saved.
1
38
2 2
Exit
OK
3
103