Setting The Instant Review; Setting The Green Button - Ricoh WG-20 Operating Manual

Setting the Instant Review

Use this setting to specify whether or not an Instant Review is displayed
immediately after images are shot. The default setting is O (On: displays
the image).
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Instant Review].
3
3
Use the four-way controller
(45) to switch between
O (On) or P (Off).
O (On)
P (Off)
The setting is saved.
4
Press the 3 button.
The camera returns to capture mode.
Instant Review 1p.68

Setting the Green Button

You can assign one of the following functions to the Green button:
[Green Mode] (p.77), [Voice Recording] (p.208), [Movie] (p.141)
or [Fn Setting] (p.132). You can activate the assigned function by just
pressing the Green button.
When the shooting mode is set to 9 (Green) Mode, [Green Button]
settings cannot be configured on the [A Rec. Mode] menu. To configure
the settings, first switch to a mode other than 9.
130
Instant Review
is displayed.
Instant Review
is not displayed.
Rec. Mode
3/4
Interval Shoot
Blink Detection
Digital Zoom
Instant Review
Memory
Green Button
Exit
MENU