Using The Self-Timer - Ricoh WG-20 Operating Manual

Using the Self-timer

In Self-timer mode, the picture is taken ten seconds or two seconds after
the shutter release button is pressed.
Stabilize the camera with a tripod or other support when taking a picture
with the self-timer.
Use this mode when you want to be included in a group picture. The picture
g
is taken approximately ten seconds after the shutter release button is pressed.
Use this mode to avoid camera shake. The picture is taken approximately two
Z
seconds after the shutter release button is pressed.
3
1
Press the four-way controller (2) in A mode.
The [Drive Mode] screen appears.
2
Use the four-way controller (45) to select g and press the
four-way controller (3).
3
Use the four-way controller
(45) to select g or Z and
press the 4 button.
The camera is ready to take
the picture using the self-timer.
When the camera detects a person's
face, the Face Detection function is
activated and the face detection frame appears (p.71).
4
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
94
Shutter release
button
Four-way controller
4 button
Drive Mode Drive Mode Drive Mode
Self-timer Self-timer Self-timer
Cancel Cancel Cancel
MENU MENU MENU
OK OK OK
OK OK OK