Connecting The Camera To An Av Device - Ricoh pentax KP Operating Manual

Connecting the Camera to an AV Device

Connect to an AV device, such as a TV, equipped with an
®
HDMI terminal to display Live View images while shooting or
to play back images in playback mode.
The USB terminal (micro B) of the camera supports SlimPort
Make sure to have a commercially available HDMI
®
and compatible HDMI cable.
1
Turn the AV device and camera off.
2
®
Connect the HDMI adapter and HDMI
3
Open the terminal cover of the camera, and
®
connect the HDMI adapter to the USB/video
output terminal.
4
Connect the other end of the HDMI
input terminal on the AV device.
5
Turn the AV device and camera on.
The camera turns on in video output mode, and the camera
information is displayed on the screen of the connected AV
device.
u Caution
• While the camera is connected to an AV device, nothing is
displayed on the camera monitor. Also, you cannot adjust the
sound volume on the camera. Adjust the volume on the AV
device.
• Some HDMI
®
.
Proper operation has been confirmed with the following
®
adapter
HDMI
SP6001 (Analogix Semiconductor, Inc.)
• Do not supply power to an HDMI
power source. This may cause the camera to malfunction.
• Images may not be output due to incompatibility with the used
®
cable.
HDMI
incorporate electronic circuits.
• MHL
t Memo
• Check the operating manual of the AV device and select a
suitable input terminal for connecting the camera.
• By default, the maximum resolution supported by both the AV
device and camera is automatically selected. If it fails to play
back images properly, change the setting in [Video Out
Resolution] of the D3 menu.
®
cable to the
®
adapters are not compatible with this camera.
®
adapter:
®
® ®
cable. Use an HDMI cable which does not
® ®
-to-HDMI adapters cannot be used.
adapter from an external
4
85