Ricoh WG-20 Operating Manual page 108

5
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
6
Press the shutter release button fully.
The screen for taking the second frame is displayed after you take
the first frame.
If you select right (5) in step 4:
The right edge of the first frame appears in semi-transparent form
on the left edge of the display.
3
If you select left (4) in step 4:
The left edge of the first frame appears in semi-transparent form
on the right edge of the display.
7
Take the second frame.
Move the camera so that the semi-
transparent image and the actual view
overlap and press the shutter release
button.
8
Take the third frame.
Repeat steps 5 to 7 to take the third frame.
The panorama images are joined and a stitched together image
appears.
The stitched together image does not appear when [Instant Review]
(p.130) is off.
• Some distortion may result from moving objects, repeating patterns,
or if nothing exists when overlapping the first and second frames
or the second and third frames on the preview guide.
• When the Face Detection function is activated (p.71), it works only
when taking the first shot.
• You cannot turn off the LCD by pressing the 4/W button
in F (Digital Panorama) mode.
106
1 2
2nd Frame 2nd Frame 2nd Frame
SHUTTER SHUTTER SHUTTER
OK OK OK Exit Exit Exit