Ricoh WG-20 Operating Manual page 84

1
Press the four-way controller (3) in A mode.
3
The Capture Mode Palette appears.
2
Use the four-way controller (2345) to select
A (Night Scene), B (Night Scene Portrait),
c (Digital SR), S (Fireworks), or U (Candlelight).
3
Press the 4 button.
The shooting mode is selected and the camera returns to capture mode.
When the camera recognizes a person's face, the Face Detection
function is activated and the face detection frame appears (p.71).
4
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
5
Press the shutter release button fully.
The picture is taken.
• The shutter speed tends to be slower when taking pictures of dark
scenes.
• To prevent the camera from shaking, set the Pixel Track SR (p.126) or use
a tripod and/or remote control (optional), the self-timer function (p.94).
• In c (Digital SR) mode, the sensitivity is automatically set to AUTO,
the [AUTO ISO Range] is set to 80-6400, and the number of recorded
pixels is fixed at f (2592×1944)/
• For S (Fireworks) mode, the sensitivity is fixed at the minimum,
the focus mode is s (Infinity), and the flash mode is a (Flash Off).
Also, the shutter speed is set to 4 seconds and the aperture is fixed
to open.
• Digital Zoom and Intelligent Zoom are not available in c (Digital SR)
mode.
82
Shutter release
button
Four-way controller
4 button
(2592×1464).