Connecting The Camera To An Av Device - Ricoh R02010 Operating Manual

Connecting the Camera to an AV Device

Connect the camera to an AV device such as TVs to display Live View images
while shooting or to play back images.
Prepare a commercially available conversion cable that is suitable for the de-
vice connected to the camera.
1
Turn the AV device and camera off.
2
Open the terminal cover of the
camera, and connect the conversion
cable to the USB terminal.
3
Connect the other end of the conversion cable to the input
terminal on the AV device.
For details, refer to the operating manual for the AV device.
4
Turn the AV device and camera on.
Caution -------------------------------------------------------------------------------------------------------
• While the camera is connected to an AV device, nothing is displayed on the camera monitor.
• The audio of the video is output from the AV device. Adjust the volume on the AV device.
Memo ---------------------------------------------------------------------------------------------------------
• The USB terminal (USB Type-C) on this camera supports DisplayPort.
• To output images to a device with an HDMI® terminal, used a USB (Type-C)-to-HDMI® adapter. Some
adapters cannot be used with this camera.
4
95