Ricoh WG-20 Operating Manual page 119

1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Recorded
Pixels].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller
(23) to change the number
of recorded pixels.
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture mode.
• The number of recorded pixels for images captured in 9 (Green)
mode is fixed at g.
• The number of recorded pixels for images captured in N (Frame
Composite) is fixed at h/h.
• The number of recorded pixels for images captured in X (Digital
Wide) mode is fixed at f. (The number of recorded pixels will be
h if you exit Digital Wide mode without taking the second picture.)
• The number of recorded pixels for images shot in
is set to V (1280×960).
• If you take and save only the first frame in F (Digital Panorama)
mode, the number of recorded pixels is fixed at i.
• The number of recorded pixels for images captured in c (Digital SR)
mode is fixed at f/
• The number of recorded pixels for images captured in
Microscope) mode is fixed at h.
Recordable Image No.
Image Tone
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Cancel
MENU
.
12
14
M
10
M
10
M
7
M
5
M
5
M
OK
OK
(Report) mode
(Digital
3
117