Overlaying Your Original Frame On An Image - Ricoh WG-20 Operating Manual

To Use a New Frame
The frames downloaded from our website or other source can be used
for adding a frame to pictures.
• Extract the downloaded frame and copy it to the FRAME folder
in the built-in memory or the SD Memory Card.
• The FRAME folder is created when the SD Memory Card is formatted
with this camera.
• For more information on downloading, refer to our website.

Overlaying Your Original Frame on an Image

You can overlay your original frame (decorative frame) on an image.
You can select the type and color of an original frame and its
position.Text can also be entered.
Frame
Type of original
Blur/Edge Composite
frame
F (All sides)/G (Upper and lower sides)/H (Right and left sides)/
Frame Type
I (Upper side)/J (Lower side)/K (Left side)/L (Right side)
Color White/Gray/Black/Pink/Pumpkin/Dark red/Dark green
Text Stamp
Available
A – Z, a – z, 0 – 9, Symbols
characters
M (Upper-left)/N (Upper-center)/O (Upper-right)/P (Lower-left)/
Display Position
Q (Lower-center)/R (Lower-right)
Color White/Gray/Black/Pink/Pumpkin/Dark red/Dark green
The Original Frame function cannot be used on images taken at
F (Digital Panorama) or
h/h/l/m in [Recorded Pixels], or movies. An error message
appears in Step 4.
(Report) modes, images recorded with
5
195