Correcting The Brightness (D-Range Setting); Press The 3 Button In A Mode; The [A Rec. Mode] Menu Appears; Use The Four-Way Controller (23) To Select - Ricoh WG-20 Operating Manual

Correcting the Brightness (D-Range Setting)

Expands the dynamic range and prevents bright and dark areas from
occurring. [Highlight Correction] adjusts the bright areas when the image
is too bright and [Shadow Correction] adjusts the dark areas when
the image is too dark.
1

Press the 3 button in A mode.

The [A Rec. Mode] menu appears.

2
Use the four-way controller (23) to select [D-Range
Setting].
3
Press the four-way controller (5).
The [D-Range Setting] screen appears.
4

Use the four-way controller

(23) to select [Highlight
Correction] or [Shadow
Correction].
5
Use the four-way controller (45) to select O or P.
6
Press the 3 button twice.
The camera returns to capture status.
The D-Range Setting icon appears
on the display.
When [Highlight Correction] is set
P
to O
When [Shadow Correction] is set
Q
to O
When [Highlight Correction] and
O
[Shadow Correction] are set to O
• When the Sensitivity is set to 80 or 100 and Highlight Correction is set
to O (On), the setting changes to 160. The setting returns when
Highlight Correction is set to P (Off).
• If you change the [Highlight Correction] or [Shadow Correction] setting
frequently, you can save time by assigning it to the Green button (p.130).
D-Range Setting
Highlight Correction
Shadow Correction
MENU
P
3 8
3
125