Spark Arrestor Maintenance - Kipor Sinemaster IG6000 Operation Manual

7.6 Spark Arrestor Maintenance

Secondary gulp valve
二次补气阀
Spark arrester
火星捕捉器
Rear cover
后面罩
Fig, 17
WARNING
■ If the generator has been running, the muffler will be very hot. Allow it to
cool before proceeding.
CAUTION
■ The spark arrester must be serviced every 100 hours to maintain its
efficiency.
1. Remove the back cover.
2. Remove the exhaust tail pipe and spark arrester.
3. Use a brush to remove carbon deposits from the spark arrester screen.
NOTE
■ Inspect the spark arrester screen for holes or tears. Replace if necessary.
4. Reinstall the spark arrester.
5 . Reinstall the upper muffler protector.
- 35 -