Voltage Selection Switch - Kipor Sinemaster IG6000 Operation Manual

.
The two 120V receptacles are rated at 20 and 30 amps respectively.Should
this current be exceeded, the circuit protection device willactivate and cut
allcurrent to the receptacle. This will be indicated by the push button popping
out. Reduce the load to the receptacle and reset the circuit protector by
pushing in the button.
5

.3 Voltage Selection Switch

The voltage selection switch has two positions: AC120V and AC120/240V.
1. When the voltage selection switch is in the 120/240V position, the generator
supplies both 120V and 240V AC power . If you operate the generator with the
switch in this position, the electric current is limited to 15 amps to the 120V
receptacles although it can prov ide 15 am ps at 240V from the 120/240V
receptacle.
2. When the voltage selection switch in the 120V position, the generator
supplies 120V AC only. It can supply a full 30 amps to the 30 Amp receptacle
or 20A to the GFCI receptacle . Total current is limited to 45.8 amps at rated
lo ad.
- 23 -