Spark Plug Service - Kipor Sinemaster IG6000 Operation Manual

.

7.5 Spark Plug Service

Recommended spark plug: WR7DC
To ensure proper engine
a nd free of deposits.
1. Open the left side maintenance c
2. Remove the spark plug cap.
Spark plug wrench
3. Clean dirt from around the spark plug base.
4. Use the wrench to remove the spark plug.
5 . Visually inspect the spark plug. Discard it if the insulator is cracked or
chipped
Clean the spark plug with a wire brush if it is to be reused.
6. Mea sure the plug gap with a feeler gauge.
T he gap should be 0.7-0.8mm (0.028-0.031in). Correct as necessary by
carefully bending the side electrode.
operation, the spark plug must be properly gapped
over.
Fig, 15
Spark plug
- 33 -