Spark plug clearance
0.7-0.8
火花塞间隙
CAUTION
■ The spark plug must be securely tightened. An improperly tightened plug
c
an become very hot and possibly damage the generator.
Never use a spark plug with an improper heat range.
■
7. Install the spark plug carefully, by hand, to avoid cross-threading.
8
. After a new spark plug has been seated by hand, it should be tightened 1/2
tu
rn with a wrench to compress its washer.
If a used plug is being re
installed, it should only require 1/8 to 1/4 turn after
being seated.
9. Reinstall the spark plug inspection cover and tighten the cover screw.
10. Close and latch th
e left side maintenance cover.
- 34 -