Output And Overload Indicators - Kipor Sinemaster IG6000 Operation Manual

5.2 Output and Overload Indicators

T he green output indicator light will remain ON during normal operating
conditions. If the generator is overloaded or if there is a short in the connecte
appliance the output indicator will go OFF and the overload indicator will go
ON and cu rrent to the connected appliance will be shut off. Correct the
o verload condition and press the overload reset switch on the panel to restore
AC power.
Check the engine oil level if the red low oil indicator comes ON.
■Before connecting an appliance to the generator, check that it is in good
order and that its electrical rating does not exceed that of the generator.
Then connect the power cord of the applianc
■When an electric motor is started, both the overload indicator light and the
output indicator light may go on simultaneously. This is normal if the overload
indicator light goes off after about four seconds. If the overload indicator light
s tays on, consult your dealer.
NOTICE
e and st
NOTICE
- 22 -
art the engine.
d