Kipor Sinemaster IG6000 Operation Manual page 30

Modification
M odification of the emission control system may lead to increased emissions.
Modification is defined as the following:
Disassembling or modifying the function or parts of the intake, fuel
or exhaust system.
Modifying o
generator.
Engine faults that may affect emission
Any of the following faults must be repaired immediately
authorized Kipor service c
Hard starting or s
Unstable idle spe
Shut down or ba
Backfire or afte
Black smoke and/or excessive fuel consumption
Replacement parts and acc
The parts making up the emission cont
been specifically approved and
trust the replaceme
same production standard as the original parts. The use of replacement parts
or accessories which are not designed by Kipor may affect the engine
emission performance. The manufacturers of replacement parts and
accessories have the responsibility to guarantee that their replacement
products will not adversely affect emission performance.
Maintenance
Maintain the generator accord
Service item s more frequently when used in dusty areas, or under conditions
of high load, temperature, and humidity.
r destroying the speed governing function of the
enter for diagnosis and repair:
hut down after starting
ed
ckfire after applying an electrical load
rfire.
essories
certified by the regulatory agencies. You can
nt parts supplied by Kipor have been manufactured to the
ing to the maintenance schedule in this section.
- 29 -
rol system applied to Kipor engine have
. Consult with your