Spark Arrestor Maintenance - Kipor Sinemaster IG3000 Operation Manual

7.6 Spark arrester maintenance
1. Remove the generator rear cover to access the spark arrestor.
2. Remove the spark arrestor from the muffler by unscrewing the clamp.
3. Clean the spark arrestor with a stiff wire brush.
4. Replace if the wire mesh is perforated or torn.
5. Reinstall the spark arrester.
6. Reinstall rear cover.
■
The spark plug must be securely tightened. An
improperly tightened plug can become very hot and
possibly damage the generator.
■
Never use a spark plug with an improper heat range.
■
If the generator has been running, the muffler will be
very hot. Allow it to cool before proceeding.
■
The spark arrester must be serviced every 100 hours
to maintain its efficiency.
■
Inspect the spark arrester screen for holes or tears.
Replace as necessary.
23