Download
Share
Print this page
Kipor Sinemaster IG3000 Operation Manual
  1. Manuals
  2. Brands
  3. Kipor Manuals
  4. Portable Generator
  5. IG3000
  6. Operation manual

Kipor Sinemaster IG3000 Operation Manual

Hide thumbs Also See for Sinemaster IG3000:

Advertisement

Quick Links

See also: Owner's Manual , Operating Manual
R
WUXI KIPOR POWER CO., LTD.
S I N E M A S T E R
DIGITAL GENERATOR
I G 3 0 0 0

Advertisement

loading
Need help?

Need help?

Do you have a question about the Sinemaster IG3000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Kipor Sinemaster IG3000

Summary of Contents for Kipor Sinemaster IG3000

  • Page 1 WUXI KIPOR POWER CO., LTD. S I N E M A S T E R DIGITAL GENERATOR I G 3 0 0 0...
  • Page 3 PREFACE Thank you for purchasing our generators. This manual covers operation and maintenance of the IG3000 generator. All information in this publication is based on the latest product information available at the time of approval for printing. We reserve the right to make changes at any time without notice and without incurring any obligation.

  • Page 4: Table Of Contents

    CONTENTS 1.SAFETY INSTRUCTIONS 2.SAFETY LABEL LOCATIONS 3.PRE-OPERATION CHECK 4.STARTING THE ENGINE 5.GENERATOR USE 6.STOPPING THE ENGINE 7.MAINTENANCE 8.TRANSPORTING/STORAGE 9.TROUBLESHOOTING 10.SPECIFICATIONS 11.WIRING DIAGRAM 12.WHEEL KIT APPENDIX -29-...

  • Page 5: Safety Instructions

    2. Modified coefficient table of ambient condition power 1. SAFETY INSTRUCTIONS The conditions of generator rated output: Altitude: 0 m Ambient temperature: 25 Relative humidity: 30% WARNING Operate carefully and make sure users and others safety. Ambient modified coefficient: C (Relative humidity 30%) WARNING Ambient temperature ( ) Altitude...
  • Page 6 WARNING APPENDIX Gasoline is extremely flammable and explosive under certain conditions. Refuel in a well ventilated area with the engine stopped. 1. The choice of the electric cable Keep away from cigarette, smoke and sparks when refueling the generator. The choice of the electric cable depends on the allowable current of the cable Always refuel in a well-ventilated location.

  • Page 7: Safety Label Locations

    The unit comes with the rubber mounting feet already installed. If you wish to install 2.SAFETY LABEL LOCATIONS the wheel kit, please perform the following procedure. 2.1 Outside view A. Install the wheel assembly a. Put a washer on each side of the wheel then slide them on the axie. Spark plug B.
  • Page 8 2.2 Control panel WHEEL KIT SMART throttle switch Parallel receptacle DC receptacle AC receptacle Output indicator light (Green) Overload indicator light (Red) Oil alarming indicator (Red) Start switch Grounding terminal Fuel valve lever Chock knob Fig 2. Control panel Parallel receptacle The parallel cabinet can be connected with the parallel socket when the generator set needs a increasing of parallel output power.

  • Page 9: Pre-Operation Check

    11. WIRING DIAGRAM 3.PRE-OPERATION CHECK Be sure to check the generator on a level surface with the engine stopped. Parallel output 3.1 Check the engine oil level. CAUTION Using nondetergent oil or 2-stroke engine oil could shorten the engine's service life. Single phase Use high-detergent, premium quality 4-stroke engine oil, certified to meet receptacle...
  • Page 10 CAUTION 10. SPECIFICATIONS Running the engine with insufficient oil can cause serious engine damage. The Low Oil Alarm System will automatically stop the engine before the oil level falls below the safe limit. However, to avoid the inconvenience of an Model IG3000 unexpected shutdown, it is still advisable to visually inspect the oil level...
  • Page 11 Gasolines containing alcohol Appliance does not operate: If you decide to use a gasoline containing alcohol(gasohol), be sure its octance rating is at least as high as that recommended by us. There are two types of Is the output indicator light ON? "gasohol": one containing ethanol, and the other containing methanol.

  • Page 12: Starting The Engine

    9.TROUBLESHOOTING 4. STARTING THE ENGINE When the engine will not start: CAUTION CAUTION Refill the fuel tank. Is there fuel in the tank? When starting the generator after adding fuel for the first time, after longterm storage, or after running out of fuel, turn the fuel valve lever to the "ON"...
  • Page 13 4.3 Insert the engine key, and turn the engine switch to ON position. 8.TRANSPORTING/STORAGE 8.1 When transporting the generator, turn the fuel valve lever OFF and keep the generator level to prevent fuel spillage. Fuel vapor or spilled fuel may ignite. START 8.2 Before storing the unit for an extended period: 1.Be sure the storage area is free of excessive...
  • Page 14 7.5 Spark arrester maintenance 4.5 Push the choke knob to the OPEN position as the engine warms up, see page 10. Back cover Spark arrester Choke knob Fig.10 High altitude operation Fig. 17 At high altitude, the standard carburetor air-fuel mixture will be excessively rich WARNING Performance will decrease, and fuel consumption will increase.

  • Page 15: Generator Use

    5. Visually inspect the spark plug. Discard it if the insulator is cracked or chipped. 5.GENERATOR USE Clean the spark plug with a wire brush if it is to be reused. 6. Measure the plug gap with a feeler gauge. The gap should be 0.5-0.75mm(0.02-0.03in).
  • Page 16 1.Open the left side maintenance cover. 5.1 AC applications 1. Start the engine and make sure the green output indicator light comes on. 2.Unsnap the clips, remove the air cleaner cover. 2. Confirm that the appliance to be used is switched off and plug in the appliance. 3.Take out the element, blow the inner side of the element with compressed air to remove the dust.
  • Page 17 7.2 Changing oil 5.3 DC application Drain the oil while the engine is still warm to assure rapid and complete draining. The DC receptacle may be used for charging 12 volt automotive-type batteries only. Output voltage is 15-30V when current receptacle on no load. DC output will vary according to the position of the Smart throttle switch.

  • Page 18: Stopping The Engine

    2. Start the engine 7.MAINTENANCE The DC receptacle may be used while the AC power is in use. An overloaded DC circuit will trip the DC circuit protector (push button comesout). If this happens, wait a few minutes before pushing in the circuit protector to The purpose of the maintenance and adjustment schedule is to keep the resume operation.