Download Print this page

Stopping The Engine; Maintenance - Kipor Sinemaster IG3000 Operation Manual

Hide thumbs Also See for Sinemaster IG3000:

Advertisement

2. Start the engine
The DC receptacle may be used while the AC power is in use.
An overloaded DC circuit will trip the DC circuit protector (push button comesout).
If this happens, wait a few minutes before pushing in the circuit protector to
resume operation.
5.4 Low oil alarm system
The low oil alarm system is designed to prevent engine damage caused by an
insufficient amount of oil in the crankcase. Before the oil level in the crankcase
falls below a safe limit, the low oil alarm system will automatically shut down the
engine(the engine switch will remain in the ON position).
If the low oil alarm system shuts down the engine the red low oil alarm indicator
light will come on when you operate the starter, and the engine will not run. If this
occurs, search for any oil leaks. And engine oil to resume normal operation.
6.STOP-ING THE ENGINE
To stop the engine in an emergency, turn the engine switch OFF.
In normal use:
1. Switch off the connected equipment and pull the inserted plug.
2. Turn off the engine switch.
3. Turn the fuel valve lever to the OFF position.
-14-

7.MAINTENANCE

The purpose of the maintenance and adjustment schedule is to keep the
generator in the best operating condition.
WARNING
Shut off the engine before performing any maintenance. If the engine must
be run, make sure the area is well ventilated. The exhaust contains poison-
ous carbon monoxide gas.
CAUTION
Use genuine our parts or the equivalent. The use of replacement parts
which are not of equivalent quality may damage the generator.
7.1Maintenance Schedule
REGULAR SERVICE PE-
RIOD (1) Perform at every
EACH
indicated month or operating
hour interval, whichever oc-
USE
curs first
ITEM
Check
Engine oil
Change
Check
Air cleaner
Clean
Spark plug
Clean-adjust
Spark arrester
Clean
Fuel sediment cup
Clean
Valve clearance
Check-adjust
Fuel tank and strainer
Clean
Fuel line
Every 2 years [Replace if necessary (3)]
Check
NOTE: (1) Log hours of operation to determine proper maintenance.
(2) Service more frequently when used in dusty areas.
(3) These items should be serviced by an authorized dealer, unless the
owner has the proper tools and is machanically proficient. See the
Shop Manual.
FIRST
EVERY 3
EVERY 6
EVERY
MONTH
MONTHS
MONTHS
YEAR
OR
OR
OR
OR
20 HRS
50 HRS
100 HRS
300 HRS
(2)
-15-
(3)
(3)

Hide quick links:

Advertisement

loading