Pc Output Text; Custom O/P Text - Texecom Premier 48 Installation Manual

Premier 48, 88, 168 & 640 Installation Manual

PC Output Text

Yes
9
wxyz
Yes
4
ghi
No
????
No
Yes
????
Yes
Text may be assigned to PC Control Outputs 1 to 8 to allow
the user to select the correct Output by description instead of
number. A maximum of 16 characters can be programmed
for each of the PC Outputs.
Text is programmed in a similar way to mobile phones.
Select characters by pressing the corresponding key the
appropriate number of times (to select a character on the
same key, press to move the cursor along).
INS176
Use keys 1 - 8 to select
a text option or use the
SCROLL key to search
i.e. 4 = PC Output 4 Text
Press NO to
edit the text
Use keys 0 - 9 to program
text the same way that a
mobile phone works
Press NO followed by YES
to clear the screen or keep
pressing NO to change between
upper case, lower case,
numerical and predictive text

Custom O/P Text

Yes
9
wxyz
Yes
3
def
No
????
Yes
Text may be assigned to Custom Outputs 1 to 4 to allow
indication on the keypads display when the output is active
(see page 66 for details).
Outputs 1 & 2 are silent and outputs 3 & 4 give an
audible warning every 30 seconds for 3 minutes or until
a code is entered or RESET is pressed.
Text is programmed in a similar way to mobile phones.
Select characters by pressing the corresponding key the
appropriate number of times (to select a character on the
same key, press to move the cursor along).
Programming the Control Panel
Use keys 1 - 4 to select
a text option or use the
SCROLL key to search
i.e. 3 = Custom O/P 3 Text
Press NO to
edit the text
Use keys 0 - 9 to program
text the same way that a
mobile phone works
55