System Text; Part Arm Text - Texecom Premier 48 Installation Manual

Premier 48, 88, 168 & 640 Installation Manual

System Text

Yes
5
jkl
Yes
4
ghi
Yes
????
No
Yes
????
Yes
The system has 7 programmable messages.
1 - Reset Message
This 32-character message is displayed whenever the control
panel requires an Engineer reset.
2 - Anti-code Msg.
This 32-character message is displayed whenever the control
panel requires a Anti-code Reset.
3 - Service Message
This 32-character message is displayed whenever the control
panel requires Daytime reset.
4 - Location Text
This 32-character message is displayed whenever the
engineer views the location text in 'Engineer Utils'.
5 - Banner Message
This 16-character message is displayed above the time and
date whenever the control panel is unarmed or fully armed.
6 - Part Arm Banner
This 16-character message is displayed above the time and
date whenever the control panel is part armed.
7 - Printer Header
This 32-character header will be printed whenever a log
printout is taken from the control panel or a Short Message
Service (SMS) text message is sent to a mobile phone.
INS176
Use keys 1 - 6 to select
a text option or use the
SCROLL key to search
i.e. 5 = Banner Message
Press YES to
edit the text
Use keys 0 - 9 to program
text the same way that a
mobile phone works
Press NO followed by YES
to clear the screen or keep
pressing NO to change between
upper case, lower case,
numerical and predictive text

Part Arm Text

Yes
6
mno
Yes
3
def
No
No
Yes
????
Yes
Text may be assigned to Part Arm 1, 2 or 3 to allow the user
to select the correct Part Arm by description instead of
number. A maximum of 16 characters can be programmed
for each of the Part Arms.
The 3 Part Arm messages are global messages and will
appear whenever one of the part arms are selected
regardless of which area is being part armed.
Text is programmed in a similar way to mobile phones.
Select characters by pressing the corresponding key the
appropriate number of times (to select a character on the
same key, press to move the cursor along).
Programming the Control Panel
Use keys 1 - 3 to select a
stay arm group or use the
SCROLL key to search
e.g. 3 = Stay Arm 3
Press No to
edit the text
Press NO to select
clear screen
Press YES to
clear screen
Use keys 0 - 9 to program
text the same way that a
mobile phone works
53