Premier 48, 88, 168 & 640 Installation Manual
Premier 48, 88, 168 and 640
•
8 programmable digicom outputs (100mA each)
•
32 character zone text
•
Facility for Plug-on Digimodem (Com300/2400/ComISDN)
•
Facility for Plug-on Paknet RP9 Radio-Pad
•
Facility for Plug-on GSM Module
•
Facility for Plug-on IP Module (ComIP/Chiron/WebWayOne)
•
Facility for a plug-on RedCARE/RM8 Relay Module
•
PC-Com/printer port
Remote Keypads
Premier LCD
•
32 character text display
•
2 fully programmable DP or EOL zones
•
1 fully programmable output (100mA -ve applied)
•
Fully adjustable back-lighting, normally bright, dim or off,
changing to bright during entry or following a key press
•
Built in piezo sounder
•
Programmable 'Info.' LED
Premier LCDL
ALL the features of the Premier LCD plus:
•
Larger 32 character text display
•
Speaker output
Premier LCDP
•
Premier LCD with a built in Proximity Tag Reader
Premier LCDLP
•
Premier LCDL with a built in Proximity Tag Reader
Premier RKP8/16Plus
•
LED Arming keypad
•
2 fully programmable EOL zones
•
CANNOT be used for Programming
Zone Expanders
Premier 4XP
•
4 fully programmable DP or EOL zones
•
2 fully programmable outputs (100mA -ve applied each)
•
Remotely wired
Premier 8XP
•
8 fully programmable DP or EOL zones
•
8 fully programmable outputs (100mA -ve applied each)
•
Speaker output
•
Programmable auxiliary input
•
Remotely wired
Premier 60iXD
•
2 loops x 30 fully programmable iD zones
•
iD biscuit technology
•
Plug-on
"iD" is a registered trade mark of Chloride Safety System Limited.
INS176
Output Expanders
Premier OP16
•
16 fully programmable outputs (100mA each)
•
1 fault output (100mA -ve applied)
•
Can be connected to mimic panels to give zone indication
•
Can be connected to relays and sounders
Premier RM8 Relay Module
•
Plug-on relay card (RedCARE footprint)
•
8 separate inputs for stand alone operation
•
8 x 3Amp relay outputs (n/o, n/c, com)
•
Output 'ON' LED indication
Communicators
Com300
•
Multi-protocol communicator supporting Fast Format,
Contact ID, SIA Level II and EasyCom Pager protocols
•
300-baud
modem
downloading using the Wintex UDL software and a PC
•
For use with an analogue telephone line (REN = 1)
Com2400
•
Multi-protocol communicator supporting Fast Format,
Contact ID, SIA Level II and EasyCom Pager and SMS
Messaging protocols
•
2400-baud
modem
downloading using the Wintex UDL software and a PC
•
Sends SMS text messages to mobile phones
•
For use with an analogue telephone line (REN = 1)
ComISDN
•
Multi-protocol communicator supporting Fast Format,
Contact ID, SIA Level II and EasyCom Pager protocols
•
300-baud (analogue) or 19200-baud (digital) Modem for
remote uploading and downloading using the Wintex
UDL software and a PC
•
For use with an ISDN telephone line
ComIP
•
Multi-protocol communicator supporting Fast Format,
Contact ID and SIA Level II protocols via TCP/IP
•
High
speed
modem
downloading using the Wintex UDL software and a PC
•
For use with ADSL/DSL/Broadband/WAN/LAN etc.
RP9 Radio-Pad
•
Paknet radio communicator supporting Fast Format and
Contact ID protocols
•
4800-baud
modem
downloading using the Wintex UDL software and a PC
GSM Module
•
Provides a GSM telephone path for Premier Digital
Communicators
•
Sends SMS text messages to mobile phones
•
Arm, Disarm, Reset the alarm, turn outputs on and off,
omit zones and send messages to the control panel
using SMS text messages
•
9600-baud
modem
downloading using the Wintex UDL software and a PC
System Overview
for
remote
uploading
for
remote
uploading
for
remote
uploading
for
remote
uploading
for
remote
uploading
and
and
and
and
and
5