Engineer Utils - Texecom Premier 48 Installation Manual

Premier 48, 88, 168 & 640 Installation Manual
View System Log
Do Bell Test
Do Walk Test
View Zone Status
System Tests
Confirm Devices
Check RKP Status
Check Exp. Status
Set System Time
Set System Date
Location Text
Print Log
Start Soak Test
Change Eng.Code
Adjust Volumes
Default NVM Data
View iD Data
Configure Radio
Press -
Part Arm 1
INS176
Use to move up and down through log (down moves back in time, up moves forward again),
to show area information or time and date,
Move backwards and forwards
View Area/Time and date
View Priority Alarms
View Normal Alarms
View Open/Close Events
Use to select an option, use
1: Test Bell
2: Test Strobe
3: Test Speaker
4: Test Digi
5: Test Panel
Press to display zones that have been tested/still need testing,
Chime every time they are activated.
Use - to enter zone number or use
zone, to omit zone temporarily
Use - to select an option or use
View Sys. Status
View Batt Status
Use to select network,
error count
Use - to select keypad,
to test output, to test sounder,
Use - to select expander,
zones/voltage/outputs/errors,
- to test outputs
Use - to enter time (24-hour format)
Use - to enter date
Press to view Location Text
Use - to enter number of events to be printed,
Use - to select an area, (
accept, to start test
Use - to enter a code,
Use to select Panel, Keypad or Expander speakers. Press
enter a value, to accept
Press - to select an option or
00: Panel Outputs
01: Digi Outputs
02: Expander Outputs
03: Keypad Outputs
04: Com???? Channels
05: RedCARE Pins
06: Zone Types
07: Zone Text
08: Expander Options
Use to select loop,
to select biscuit,
Use - to select a device,
enter zone number,
to enter zone number or use
Part Arm 2

Engineer Utils

- or
6:
7:
8:
9:
to search,
to search,
to confirm Devices,
to select network,
to select network,
to test zones,
= all areas,
to accept
to search,
09:
10:
11:
12:
13:
14:
15:
16:
to select normal scan, quick scan or biscuit mapping. Use
to edit, - to enter zone number,
to learn device,
accept
Alter Part Arms
to search, ,
Quick Reference Guide
- or to find specific events
View Omits/Reinstate Events
View Maintenance Events
View Tamper Alarms
View Test Call Events
View Matching Events
to activate outputs
Test RedCARE
Fast
LCD Display
User Outputs
to make zones
to walk test selected
to accept
Test Outputs (see Do Bell Test)
View Version No.
to view error count,
to display errors/tamper,
to display
to test sounder,
, to accept
, to accept
to print log
= areas A – H and I –P),
to edit,
to default
Remote Options
User Codes
System Timers
System Options
Area Options
System Text
UDL Options
Digi Options
to accept
to map zone,
or to select Part Arms 1, 2 or 3
Part Arm 3
to reset
to
- to
- to
111