Confirm Devices; View Rkp Status; Check Exp. Status - Texecom Premier 48 Installation Manual

Programming the Control Panel

Confirm Devices

Yes
5
jkl
Yes
Yes
Yes
Area
Reset
Menu
This option allows the networks to be viewed to see what
devices are connected and whether there are any problems.
Whenever new devices are added to the system, the
networks must be checked and confirmed.
If any devices are removed from the system, the networks
must be rechecked and reconfirmed.
An 'X' on the display indicates that device that was
previous fitted is no longer being seen by the control
panel.
94
Use the SCROLL key to
select the required network
Press YES if the number
of devices fitted is correct.
An 'X' on the display indicates
that a device was previous fitted
Press YES to confirm
the devices fitted
(a confirmation tone
will be heard)
Press AREA to view the network
errors (the total number of errors
on the network and the last device
to cause an error is being displayed)
Press RESET to
clear the network errors
Premier 48, 88, 168 & 640 Installation Manual

View RKP Status

Yes
6
mno
Yes
??
Menu
This option allows the status of the keypad, the zones and the
output to be viewed.

Check Exp. Status

Yes
7
pqrs
Yes
??
Area
Menu
This option allows the status of the expander, the zones,
voltage/inputs and outputs to be viewed.
Use keys 1 - 8 to select a
keypad and press 0 to
toggle between networks e.g.
0, 3 = Network 2, Keypad 3
Press AREA to display errors
Press NO to test output
Press OMIT to test sounder
Use keys 1 - 8 to select an
expander and press 0 to
toggle between networks e.g.
0 , 2 = Network 2, Expander 2
Press AREA to change between
zones/voltage/outputs/errors
Press CHIME to test zones
Press OMIT to test sounder
Press 1 - 8 to test outputs
INS176