Arming Modes; Area Arm Suites - Texecom Premier 48 Installation Manual

Programming the Control Panel

Arming Modes

Yes
1
_
Yes
1
Yes
The way that an area arms can be configured for any of the
following options:
1 - Entry/Exit
The area will arm after the 'Entry/Exit' door has been closed
and the 'Exit Settle' timer has expired.
2 - Exit Term.
The area will arm after the 'Entry/Exit' door has been closed,
the 'Exit Terminator' button has been pressed and the 'Exit
Settle' timer has expired.
3 - Timed Exit
The area will arm after the programmed 'Exit Time' has
expired.
If an 'Exit Terminator' zone is activated at any point
during the exit mode, any remaining exit time is
cancelled and the area will arm immediately.
4 - Instant
The area will arm instantly.
5 - Deferred
The area will arm after the programmed 'Exit Time' has
expired. However, if any zones not on the exit route are
activated during the exit mode, the 'Exit Time' is restarted.
40
Use the SCROLL key
to select an area
Use keys 1 - 5 to select
an arming mode
e.g. 1 = Entry/Exit
Premier 48, 88, 168 & 640 Installation Manual

Area Arm Suites

Yes
2
abc
Yes
4
ghi
No
3
def
Yes
The Premier 48 has 4 Area Arm Suites the Premier 88 has 8
Area Arm Suites and the Premier 168 and 640 both have 16
Area Arm Suites. Any number of areas can be assigned to
each suite. Areas assigned to an Area Arm Suite will be
armed when the suite is selected, making it easier for the
user to select multiple areas if required.
Example
Area Arm Suites could be useful in a domestic situation
where the user wants to arm areas A and B at night but does
not want to select each area individually.
•
Areas 'A and B ' would be assigned to 'Area Arm Suite 1'
•
When the user wants to arm the system at night, 'Area
Arm Suite 1' would be selected
•
Areas A and B are automatically selected for arming
Descriptive text may also be assigned to the Area Arm
Suite (see page 41 for details).
Area Arm Suite Controller
The suites can be assigned to keypads so that different
combinations of areas can be armed or disarmed depending
on which keypad is used (see page 57 for details) and
operates as follows:
•
Keypad 1 = Area Arm Suite 1, Keypad 2 = Area Arm
Suite 2, Keypad 3 = Area Arm Suite 3 etc.
•
When a User code is entered at a keypad, one of the
'Area Arm Suites' is selected (depending on which
keypad was used) and the areas contained within that
suite arm using the arming mode for that suite, the
keypad sounder will also follow the areas defined by the
suite.
Use keys 1 - 8 to select an
Area Arm Suite or use the
SCROLL key to search e.g. 4
Press NO to edit
the Part Arm Suite
Use keys 1 - 8 to select an
area e.g. 3 = C. Use the
AREA key to toggle between
areas A to H and I to P
INS176