Set System Time; Set System Date; Change Eng. Code; Adjust Volumes - Texecom Premier 48 Installation Manual

Premier 48, 88, 168 & 640 Installation Manual

Set System Time

Yes
8
tuv
Yes
????
Yes
The control panel has a real time clock that is used to date
and time stamp events that are recorded within the system
log. The option allows you to set the control panel time.

Set System Date

Yes
9
wxyz
Yes
??????
Yes
The control panel has a real time clock that is used to date
and time stamp events that are recorded within the system
log. The option allows you to set the control panel date.
INS176
Use keys 0 - 9 to enter the
new time (24-Hour format)
e.g. 1645 = 4:45 pm
Use keys 0 - 9 to enter the
new date DD/MM/YY
e.g. 030501 = 3rd May 2001

Change Eng. Code

Yes
Yes
????
Yes
This option allows the Engineer code (User 00) to be changed.
This code can be 4, 5 or 6 digits in length. The system will
allow a mixture of different length User codes.

Adjust Volumes

Yes
Yes
No
8
tuv
Menu
This option is used to adjust the volume level of speakers that
are connected to the control panel, keypads and expanders.
Pressing the CHIME key will cause the speaker that is
being programmed to generate the exit tone at the
selected volume level.
Programming the Control Panel
Enter User code number
4, 5 or 6 digits long
e.g. 1234 = 1234
Use the SCROLL key
to select a Panel, Keypad
or Expander Speaker
Enter a value or use the
SCROLL key to increase
or decrease the value
e.g. 8 = Full Volume
95