Kvm Configuration Fine-Tuning - Raritan TeleReach TR361 User Manual

14
14. The Log On screen will appear (Figure 17).
15. Enter a User Name and Password, pressing the <Enter> key after each entry.
NOTE: Only administrators (users with administrative privileges) can log on at the TeleReach
Admin Console.
TeleReach's default Log On user name is <admin> with the password <raritan>. This user has
administrative privileges. Passwords are case sensitive and must be entered in the exact case
combination in which they were created. The default password <raritan> must be entered entirely in
lower case letters.
16. See 8. Administrative Functions for more on setting up users and performing other
administrative functions from the TeleReach Admin Console.

KVM Configuration Fine-Tuning

From each Direct Analog User Console attached to TeleReach, optimal TeleReach performance
requires fine-tuning of:
•
the KVM switch and
•
the attached Target Servers
NOTE: Direct Analog User Consoles can be attached to User Ports 1 through 4. Each Direct Analog
User Console will view the KVM switch or server attached to the corresponding KVM Port. For
example, the User Console attached to User Port 1 will view the KVM switch or server attached to
KVM Port 1. Similarly, the User Console attached to User Port 2 will view the KVM switch or server
attached to KVM Port 2, and so on.
Figure 17. Log On Screen
Setup